500W 12V HP6 Power Amplifier Boost Switch Board Power Board + Protection DC Converter

500W 12V HP6 Power Amplifier Boost Switch Board Power Board + Protection DC Converter
  • Продавецwww.yourartsdesire.us
  • Список ценUS $33.05piece
  • Продажная ценаUS $33.05piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,6 (855)

Oписание продукта

1

Product Description

Model LP-500W-12 LP-500W-24 LP-500W-48

DC output voltage 12V 24V 48V

Output voltage tolerance 1% 1% 1%

Rated output current 37.5A 20.8A 10.4A

Output current range 0~37.5A 0~20.8A 0~10.4A

Output power 450W 499.2W 499.2W

Ripple and noise 120mVp-p 240mVp-p 300mVp-p

Adjustable DC voltage range 10.5~14V 20.5~26.5V 44.5~51V

 
INPUT

Input voltage range 85~132VAC/176~264VAC(switchover) or 248~373VDC 47~63Hz

AC input current 9.5A/115VAC 4.8A/230VAC

Efficiency 83% 85% 86%

Impulse current Cold starting current: 15A/115VAC 30A/230VAC

Leakage current <2mA/240VAC

 

PROTECTION

Overload protection 110%~150%

Protection mode: cut off output and reset automatically

Overvoltage protection 14~18V 27~30V 51~54V

Protection mode: cut off output and reset automatically

 

ENVIRONMENT

Work temperature, humidity -10C~+50C;20%~90 %RH

Storage temperature, humidity -20C~+85C;10%~95 %RH

Shock resistance 10~500Hz,2G 10min./1 cycle,duration: 60min, each shaft

 

SAFETY

Voltage withstand capacity Input-output: 2KVAC Input-earth: 1.5KVAC Output-earth: 0.5KVAC

Insulation resistance Input-output, input-earth, output-earth: 100M Ohms/500VDC

 

STANDARD

Safety standard Conforms to UL1012

EMC standard Design refer to FCC Part15 J Conduction Class B

 

OTHERS

Weight 0.82KG

Package

Outline size 100*90*110mm(L*W*H)

According to your order,we can provide different cartons for you.

 

NOTE:

1. All parameters, except special situation, are measured under 230VAC voltage input and rated load at 25C.

2. The ripple and noise voltage are measured in condition that capacitance of 0.1 and 47 are applied to ends

    of 12inch twisted-pair of 20MHz bandwidth oscilloscope.

3. The tolerance is the sum of setting voltage error, voltage and current regulation factor.

467HTB1sFRpXfvsK1Rjy0Fiq6zwtXXaq